Actan GS

Actan GS - 13 key benefits


  1. Overcoatable after only 2 hours at 20°C
  2. Only one coat required
  3. Coating thickness not critical for adhesion
  4. High coverage: 15-18 m² per litre
  5. Smooth and even finish
  6. Touch dry: 15 minutes
  7. Early rain resistance after +/- 2 hours
  8. No physical or chemical profiling required when applied on new steel
  9. Can be applied from 5°C to 30°C
  10. Ultra low VOC (< 0,1g/litre)
  11. Available in 2 standard colours: NH (non hiding) and grey.
  12. Safe to use: non-irritant and odour-free
  13. Long shelf-life (1 year) in original closed packaging


Actan GS



ACTAN®GS is a long-term adhesion primer for use on newly, partially or fully weathered galvanized steel, aluminium, copper, bronze and stainless steel.



It can be sprayed or brushed without further dilution and forms on drying a hard, flexible and non porous film which adheres perfectly to the surface.

ACTAN®GS is an environmentally friendly product for treating galvanized and non ferrous metals prior to the application of a wide range of protective paint systems.


Pleaso also check our FAQ's or Uses sections for more information.



.

Technical data-sheets



Actan GS400 (Grey) - pdf


Actan GS NH (non-hiding) - pdf


Main properties



Coverage: 15-18 m²/l

Density: 1,2

Solids: +/-50%

pH: +/- 5,5

Actan GS - How to use



Surface: hot-dip or electro galvanised steel, aluminium, copper, bronze, stainless steel


All types of solvent based paints can be applied on top of ACTAN®GS. Alkyd paints are not recommended on zinc.


CONTACT US


Boulevard Louis Schmidtlaan, 3

BE 1040 Brussels BELGIUM

  +(32) 2 732 27 77

© Copyright Pugh & Co International 2018. All Rights Reserved.